con1_meny_top_over.png  con1_meny_top_shadow.png
ta-logo_3-copy.jpg
con1_meny_top_under.png

   

 

Pickling spray

TACAB Pickling spray are used for simultaneous pickling of welding joints and free surfaces for larger welded stainless steel construction. TACAB Pickling spray standard is applied by spraying with a membrane pump. After pickling and ample rinsing with water (high pressure) the corrosive resistance is restored in the welded area.


TACAB Pickling Spray Standard

TACAB pickling spray are developed for pickling of stainless steel and acid resistant steels. Higher alloyed grades (duplex) can be pickled with prolonged pickling times. TACAB Pickling Spray Standard is sold in the following sizes of packages: 25, 200 kilo and 1250 kg.

TACAB-Spraybetloesning-StandardLR-6.png

TACAB Pickling Spray Super

Effective pickling spray developed for higher alloyes stainless steels, example lean duplex, duplex and super duplex but can be used on lower stainless steel grades with short pickling times. TACAB pickling spray super gives very good results where "ordinary" pickling products give stained / flammable results on lower alloyed stainless steels.

TACAB Pickling Spray Super is sold in the following sizes of packages: 25, 200 kilo and 1250 kg.

TACAB-Spraybetloening-SuperLR-4.png


TACAB NRC 25

TACAB NRC 25 color additive is suitable to use together with all TACAB pickling spray products and provides a sharp red-purple color which makes it easier to see where the product has been appliied. TACAB NRC 25 also reduces the amount of toxic NOX gases developed during the pickling process by at least 50% .

One packaging of NRC 25 is sufficient for 25 kg (one can) TACAB pickling spray.









 
   

© TA Chemistry AB | +46 293 30885 | contact@tachemistry.com | Website with Sitoo